Bio-rad Model 2110 Fraction Collector Uživatelský manuál stáhnout pdf (Strana 20)

7.2 Remote Operation with BioLogic LP

Use System Cable 1 (catalog number 731-8261) to connect the

BioLogic LP to the fraction collector. Connect the 9-pin “D” connector to

rear of the Model 2110, and the mini-DIN plug to the rear port of the

BioLogic LP controller in the port marked FRACTION COLLECTOR.

(See BioLogic LP manual if further explanation is required.) The

BioLogic LP enables sophisticated collection, including programmed

collection windows, peak detection, and a combination of peak detection

and collection windows. The BioLogic LP sends “advance” commands to

the fraction collector.

7.3 Remote Operation with BioLogic System

Use System Cable 5 (catalog number 731-8265) to connect the

BioLogic System to the fraction collector. Connect the 9-pin “D” connec-

tor to rear of the Model 2110. Connect the black wire to the FC ADV port

of the AUX connector, which is port #5. Connect the white wire to the

GND port of the AUX connector, which is port #9. Refer to the separate

instruction sheet for the wiring diagram and color code for System Cable

To connect the wires to the AUX port of the BioLogic System, turn

the small flathead screwdriver counterclockwise to back out the screw.

Insert the bare wire into the port and turn the screwdriver clockwise to

secure the connection. The BioLogic System enables sophisticated

collection, including programmed collection windows, peak detection,

and a combination of peak detection and collection windows. The

BioLogic System sends “advance” commands to the fraction collector.

7.4 Remote Operation with other Instruments

Use System Cable 5 (catalog number 731-8265) to connect the Model

2110 Fraction Collector to other instruments. Signals are accessible via

the 9-pin “D” connector on the back of the instrument. All of the input and

output signals, with the exception of the Advanced Contact pins 7 and 8,

are TTL active low.

Drop counting is performed by the sensor in the drop arm.

Pin Function Signal Type

1 External Advance Input

2 Drops Output

3 Advanced Output

4 Ready Output

5 Alarm Output

M7318120G.qxd 10/21/2002 2:48 PM Page 16

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 28 29

Žádné komentáře

Bio-rad Model 2110 Fraction Collector Uživatelský manuál Strana 20